Deutsch English Español Français ???????
ABOUT US OFFERS ARCHIVE CONTACT
subcategories:     Manufacturer: 
reference number: 
Brecher und Brecheranlagen       Seite     1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34
  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69
  70  71  72  73  74  75  76  77  78  79  80  81  82  83  84  85  86
Ref.-Nr:2709 Extex_Megabite Ref.-Nr:2708 LT105R_2708 Ref.-Nr:2648 DKT800_115 Ref.-Nr:2632 EB 1500x 1200 Ref.-Nr:2621 C78_2621
Ref.-Nr:2609 Bergeaud_GY48 Ref.-Nr:2592 10_10_4_2592 Ref.-Nr:2562 1 piece BJD Mud Hog breaker \ " mud pig \ " 
breaker size: 4,272 mm
weight: 23 t. 

Processing of flush material with high degree of moisture (e.g., from clay with a moisture contents of 40%).
Breakage and mixing in an operation.
From e.g., schist (slate) and stone can be won high fines. 
Production by mineral fillings for garbage dumps, without Betonit must be added.
Suitably for the following materials / operational areas: 
Mineral fillings of clay to the base sealing and cover of garbage dumps, burnt clay, ores, carbon, slates, chalk, limestone, mixing of contaminated earth with substrate.

CONSTRUCTION ATTRIBUTE
FRAME 
Welded steel construction, equipped with interchangeable (compatible) chilled cast iron - or steel disguising and outside mounted standing storage. To make easier the servicing, access doors exist. The output of discharge stays partially open, so that impurity can pass the machine as a rule without damaging them. Still, all impurities from the filling material should be removed before they can reach in the machine. 

ROTOR 
The rotor is composed of steel discs which are mounted on an axle which is hung up in sealed bracket. The hammers which are so constructed that they are suitable for the material to be chopped up are held by bolts which are screwed together with the steel screws. The bolts can be easily removed for the exchange of the hammers by openings in the side frame of the machine.

SHEAR PLATE
The shear plate is an endless tape from separately screwed and interchangeable steel limbs linked with each other. The actuation occurs trough a gearwheel engine with a chain - and spur gear impulse. The operating angle of  shear plate  operates an optimum crushing and a minimum of abrasion originates in record and hammering. The distance between the shear plate and the hammers is easily adjustable to fulfil the different requirements for the final product.
Mud_Hog_Brecher Ref.-Nr:2553 Pathfinder1180x650 Ref.-Nr:2549 HS14_2548
ABOUT US   ARCHIVE   OFFERS   CONTACT